![]() If the code doesn’t turn off, you might have a different problem. The error code will be displayed until the problem has been resolved. Your washing machine will automatically stop rotating the drum and lengthen the rinsing time to remove the excess soap. If you’ve noticed excessive suds in the drum during your wash cycle, and the 5D code shows on your control panel, your machine is already handling the problem. Here are some steps you need to take, depending on what you suspect is causing the issue. Once you have identified what might be causing the 5D or SD code on your Whirlpool washer, you can start taking steps to fix the problem. This might require the assistance of a plumber, but you might be able to solve the problem yourself too. Clogged Drain Pump or Drain Lineįinally, some appliance technicians have noticed that a clogged drain pump can also result in a 5D error code on your control panel. You will be able to tell if this is the problem if the machine stops immediately after starting any of the program modes. This error code might also indicate that you have an issue with your water pressure switch. ![]() If repeatedly overloaded, your washing machine might become permanently damaged. Overloading the machine can cause issues with this error code, as well as other Whirlpool washing machine faults, such as a misaligned washer drum and excessive vibrations. The issue might be caused by the fact that you have overfilled your washing machine with clothes. Over-pouring your detergent into the container could cause too much of a liquid build-up and even contribute to the previous issue of excessive soapsuds in the machine. Too Much DetergentĮxcessive liquid or water in your machine might be caused by too much liquid cloth washing detergent added to the cycle. In this case, you must allow the appliance to complete this cycle until the excess suds have drained away. The error code could indicate that the soap has created excessive suds in the washer, in which case it is running a suds reduction routine. Here’s what might be causing it: Excessive Suds The 5D code may also appear as SD on your display and typically alerts users to an issue with too much liquid or moisture in your Whirlpool washer. First of all, you need to understand what might cause the 5D code to show on the display of your appliance.
0 Comments
Leave a Reply. |